When winding machine is in use, the customer will surely encounter a situation that is the membrane breaking problem of the film winding machine. What should we do to solve this problem again? Before Xiaobian also used in winding machine, how to solve the problem of winding membrane? How to solve this problem is briefly introduced in this article.

This machine is in use when why broken membrane, quality first may be used in wrapping film is poor, the general film film and organic film manual difference, general telephone film winding machine is suitable for use, but for the film, the film wrapped around the machine is still relatively high quality the choice of wrapping film of high quality, in order to ensure that the machine is not easy to break when in use.

When wrapping wrapped products, we should pay attention to the sharp appearance of packages, because our products are wrapped on pallets, so our customers should pay attention to whether the appearance of packages will cause damage to winding films when packaging.

Also, we all know that the guide roller is the main part of the machine. If there is burr on the guide roller, it will cause the fracture of the winding film. So we need to use the sandpaper to grind the guide roller to prevent the rupture of the winding film.

If the speed of the turntable is too fast or too slow, we need to adjust it. Because too fast or too slow, the drawing ratio of the winding film is not suitable, causing the rupture of the stretching film.

Mold is the main part of the winding machine, the main function is to control the tensile membrane is increased or decreased, if the mold failure it is possible because the lifting motor problems, which could not be wound, or is there may be a limit switch, which requires our technicians to repair, most likely is the brLC problem, in this case, you need to find new suppliers to replace the brLC control system.